Southern Steel QLD provides a complete range of Merchant Bar products which includes angle bars, round bars, square bars, flat bars and channels. Merchant Bar steel products are generally used in structural applications that involve welding, bending, punching and forming and are also commonly used for the structural elements of floor and roof joists, walkways and railings, and in all aspects of construction. Crucial to the engineering and fabrication industries, Southern Steel QLD’s Merchant Bar products come in a wide range of stock sizes and are compliant to the relevant Australian standards.
Square Edge Flats
Square edge flats are solid flat-surface steel sections with a rectangular cross-section area that can be cut, drilled and formed. Available in various grades and sizes, square edge flats are used in engineering, residential, commercial and industrial construction, as well as manufacturing, transport, storage and mining infrastructure.
Southern Steel QLD square edge flats are manufactured in Australia from 300PLUS steel and exceed the minimum requirements of AS/NZS 3679.1.
- Manufactured in accordance with the requirements of Australian Standard AS/NZS 3679.1 2016 in grade 300
- Grade 350 & 350L0 available on request
- Non-standard lengths or cut to size on request
- 10x3mm flats supplied in 4m lengths
- 16×8 and above flats supplied in 6m lengths
- All lens/bundles are approximate
- Denotes Rydal Flats
DESIGNATION | WEIGHT KG/M | SURFACE AREA | WIDTH (W) | THICKNESS (T) | METRES PER TONNE | APPROX LENS PER BUNDLE |
10x3* | 0.241 | 0.026 | 10 | 3 | 4149.4 | 964 = 1t |
13x3* | 0.313 | 0.032 | 13 | 3 | 3194.9 | 798 = 1t |
13x5* | 0.468 | 0.036 | 13 | 5 | 2136.8 | 478 = 1t |
13x6 | 0.628 | 0.038 | 13 | 6 | 1593.4 | 398 = 1t |
16x3* | 0.386 | 0.038 | 16 | 3 | 2590.7 | 647 = 1t |
16x5* | 0.643 | 0.042 | 16 | 5 | 1555.2 | 388 = 1t |
16x8* | 1.030 | 0.048 | 16 | 8 | 970.9 | 160 = 0.989t |
20x3 | 0.483 | 0.046 | 20 | 3 | 2070.4 | 346 = 1.002t |
20x5 | 0.805 | 0.050 | 20 | 5 | 1242.2 | 208 = 1.004t |
20x6 | 0.966 | 0.052 | 20 | 6 | 1035.2 | 173 = 1.002t |
20x10 | 1.609 | 0.060 | 20 | 10 | 621.5 | 208 = 2.008t |
25x3 | 0.604 | 0.058 | 25 | 3 | 1655.6 | 277 = 1.003t |
25x5 | 1.006 | 0.060 | 25 | 5 | 994.0 | 332 = 2.004t |
25x6 | 1.207 | 0.062 | 25 | 6 | 828.5 | 278 = 2.013t |
25x8 | 1.609 | 0.066 | 25 | 8 | 621.5 | 208 = 2.008t |
25x10 | 2.012 | 0.070 | 25 | 10 | 497.0 | 166 = 2.004t |
25x12 | 2.414 | 0.074 | 25 | 12 | 414.3 | 138 = 1.999t |
32x3 | 0.772 | 0.072 | 32 | 3 | 1295.3 | 219 - 1.015t |
32x5 | 1.287 | 0.074 | 32 | 5 | 777.0 | 265 = 2.047t |
32x6 | 1.545 | 0.076 | 32 | 6 | 647.2 | 215 = 1.993t |
32x8 | 2.060 | 0.080 | 32 | 8 | 485.4 | 162 = 2.002t |
32x10 | 2.575 | 0.084 | 32 | 10 | 388.3 | 129 = 1.993t |
32x12 | 3.090 | 0.088 | 32 | 12 | 323.6 | 108 = 2.002t |
40x3 | 0.966 | 0.088 | 40 | 3 | 1035.2 | 173 = 1.002t |
40x5 | 1.609 | 0.090 | 40 | 5 | 621.5 | 208 = 2.008t |
40x6 | 1.931 | 0.092 | 40 | 6 | 517.9 | 173 = 2.005t |
40x8 | 2.575 | 0.096 | 40 | 8 | 388.3 | 129 = 1.993t |
40x10 | 3.219 | 0.10 | 40 | 10 | 310.7 | 103 = 1.989t |
40x12 | 3.862 | 0.104 | 40 | 12 | 258.9 | 87 = 2.016t |
40x16 | 5.150 | 0.112 | 40 | 16 | 194.2 | 66 = 2.039t |
40x20 | 6.437 | 0.120 | 40 | 20 | 155.4 | 52 = 2.008t |
50x3 | 1.207 | 0.108 | 50 | 3 | 828.5 | 280 = 2.027t |
50x5 | 2.012 | 0.110 | 50 | 5 | 497.0 | 166 = 2.004t |
50x6 | 2.414 | 0.112 | 50 | 6 | 414.3 | 139 = 2.013t |
50x8 | 3.219 | 0.116 | 50 | 8 | 310.7 | 104 = 2.008t |
50x10 | 4.023 | 0.120 | 50 | 10 | 248.6 | 83 = 2.004t |
50x12 | 4.828 | 0.124 | 50 | 12 | 207.1 | 69 = 1.999t |
50x16 | 6.437 | 0.132 | 50 | 16 | 155.4 | 52 = 2.008t |
50x20 | 8.046 | 0.140 | 50 | 20 | 124.3 | 42 = 2.028t |
50x25 | 10.058 | 0.150 | 50 | 25 | 99.4 | 34 = 2.052t |
65x3 | 1.569 | 0.136 | 65 | 3 | 637.3 | 213 = 2.005t |
65x5 | 2.615 | 0.140 | 65 | 5 | 382.4 | 127 = 1.993t |
65x6 | 3.138 | 0.142 | 65 | 5 | 318.7 | 107 = 2.015t |
65x8 | 4.184 | 0.146 | 65 | 8 | 239.0 | 80 = 2.008t |
65x10 | 5.230 | 0.150 | 65 | 10 | 191.2 | 65 = 2.040t |
65x12 | 6.276 | 0.154 | 65 | 12 | 159.3 | 53 = 1.996t |
65x16 | 8.368 | 0.162 | 65 | 16 | 119.5 | 41 = 2.059t |
65x20 | 10.460 | 0.170 | 65 | 20 | 95.6 | 35 = 2.197t |
75x5 | 3.017 | 0.160 | 75 | 5 | 331.5 | 110 = 1.991t |
75x6 | 3.621 | 0.162 | 75 | 6 | 276.2 | 92 = 1.999t |
75x8 | 4.828 | 0.166 | 75 | 8 | 207.1 | 71 = 2.057t |
75x10 | 6.035 | 0.170 | 75 | 10 | 165.7 | 55 = 1.991t |
75x12 | 7.242 | 0.174 | 75 | 12 | 138.1 | 46 = 1.999t |
75x16 | 9.656 | 0.182 | 75 | 16 | 103.6 | 34 = 1.970t |
75x20 | 12.069 | 0.190 | 75 | 20 | 82.9 | 28 = 2.028t |
75x25 | 15.087 | 0.200 | 75 | 25 | 66.3 | 23 = 2.029t |
90x6 | 4.345 | 0.192 | 90 | 6 | 230.1 | 78 = 2.033t |
90x8 | 5.793 | 0.196 | 90 | 8 | 172.6 | 59 = 2.051t |
90x10 | 7.242 | 0.200 | 90 | 10 | 138.1 | 46 = 1.999t |
90x12 | 8.690 | 0.204 | 90 | 12 | 115.1 | 38 = 1.981t |
100x5 | 4.023 | 0.210 | 100 | 5 | 248.6 | 85 = 2.052t |
100x6 | 4.828 | 0.212 | 100 | 6 | 207.1 | 71 = 2.057t |
100x8 | 6.437 | 0.216 | 100 | 8 | 155.4 | 52 = 2.008t |
100x10 | 8.046 | 0.220 | 100 | 10 | 124.3 | 43 = 2.076t |
100x12 | 9.656 | 0.224 | 100 | 12 | 103.6 | 36 = 2.086t |
100x16 | 12.874 | 0.232 | 100 | 16 | 77.7 | 26 = 2.008t |
100x20 | 16.093 | 0.240 | 100 | 20 | 62.1 | 22 = 2.124t |
100x25 | 20.116 | 0.250 | 100 | 25 | 49.7 | 17 = 2.052t |
110x6 | 5.180 | 0.232 | 110 | 6 | 193.1 | 64 = 2.034t |
110x8 | 7.081 | 0.236 | 110 | 8 | 141.2 | 48 = 2.039t |
110x10 | 8.851 | 0.240 | 110 | 10 | 113.0 | 39 = 2.071t |
110x12 | 10.621 | 0.244 | 110 | 12 | 94.2 | 34 = 2.167t |
130x5 | 5.230 | 0.270 | 130 | 5 | 191.2 | 65 = 2.040t |
130x6 | 6.276 | 0.272 | 130 | 6 | 159.3 | 55 = 2.071t |
130x8 | 8.368 | 0.276 | 130 | 8 | 119.5 | 41 = 2.059t |
130x10 | 10.460 | 0.280 | 130 | 10 | 95.6 | 33 = 2.071t |
130x12 | 12.552 | 0.284 | 130 | 12 | 79.7 | 28 = 2.109t |
130x16 | 16.736 | 0.292 | 130 | 16 | 59.8 | 20 = 2.008t |
130x20 | 20.920 | 0.300 | 130 | 20 | 47.8 | 16 = 2.008t |
130x25 | 26.150 | 0.310 | 130 | 25 | 38.2 | 13 = 2.040t |
150x5 | 6.035 | 0.310 | 150 | 5 | 165.7 | 56 = 2.028t |
150x6 | 7.242 | 0.312 | 150 | 6 | 138.1 | 46 = 1.999t |
150x8 | 9.656 | 0.316 | 150 | 8 | 103.6 | 36 = 2.086t |
150x10 | 12.069 | 0.320 | 150 | 10 | 82.9 | 29 = 2.100t |
150x12 | 14.483 | 0.324 | 150 | 12 | 69.0 | 23 = 1.999t |
150x16 | 19.311 | 0.332 | 150 | 16 | 51.8 | 16 = 2.202t |
150x20 | 24.139 | 0.340 | 150 | 20 | 41.4 | 14 = 2.028t |
150x25 | 30.173 | 0.350 | 150 | 25 | 33.1 | 11 = 1.991t |
150x50 | 60.346 | 0.400 | 150 | 50 | 16.6 | 5 = 1.810t |
180x6 | 8.690 | 0.372 | 180 | 6 | 115.1 | 40 = 2.086t |
180x10 | 14.483 | 0.380 | 180 | 10 | 69.0 | 24 = 2.086t |
180x12 | 17.380 | 0.384 | 180 | 12 | 57.5 | 20 = 2.086t |
180x16 | 23.173 | 0.392 | 180 | 16 | 43.2 | 11 = 1.529t |
180x20 | 28.967 | 0.400 | 180 | 20 | 34.5 | 12 = 2.086t |
180x25 | 36.208 | 0.450 | 180 | 25 | 27.6 | 9 = 1.955t |
200x6 | 9.656 | 0.412 | 200 | 6 | 103.6 | 35 = 2.086t |
200x8 | 12.874 | 0.416 | 200 | 8 | 77.7 | 26 = 2.008t |
200x10 | 16.093 | 0.420 | 200 | 10 | 62.1 | 21 = 2.086t |
200x12 | 19.311 | 0.424 | 200 | 12 | 51.8 | 13=2.008t |
200x16 | 25.748 | 0.432 | 200 | 16 | 38.8 | 14=2.163t |
200x20 | 32.185 | 0.440 | 200 | 20 | 31.1 | 11=2.124t |
200x25 | 40.231 | 0.450 | 200 | 25 | 24.9 | 8=1.931t |
250x6 | 12.069 | 0.512 | 250 | 6 | 82.9 | 28=2.028t |
250x8 | 16.093 | 0.516 | 250 | 8 | 62.1 | 23=2.221t |
250x10 | 20.116 | 0.520 | 250 | 10 | 49.7 | 18=2.172t |
250x12 | 24.139 | 0.524 | 250 | 12 | 41.4 | 16=2.317t |
250x16 | 32.185 | 0.528 | 250 | 16 | 31.1 | 11=2.124t |
250x20 | 40.231 | 0.532 | 250 | 20 | 24.9 | 8=1.931t |
250x25 | 50.289 | 0.536 | 250 | 25 | 19.9 | 7=2.112t |
300x6 | 14.483 | 0.612 | 300 | 6 | 69.0 | 24 = 2.086t |
300x8 | 19.311 | 0.616 | 300 | 8 | 51.8 | 19=2.202t |
300x10 | 24.139 | 0.620 | 300 | 10 | 41.4 | 16=2.317t |
300x12 | 28.967 | 0.624 | 300 | 12 | 34.5 | 12=2.086t |
300x16 | 38.622 | 0.628 | 300 | 16 | 25.9 | 10=2.317t |
300x20 | 48.278 | 0.632 | 300 | 20 | 20.7 | 8=2.317t |
300x25 | 60.347 | 0.636 | 300 | 25 | 16.6 | 7=2.535t |
Square Mild Steel
Square mild steel bars are durable and highly versatile solid steel bars available in various sizes. They are very easy to weld and are solid and rigid, able to withstand a range of weather conditions. They are used for reinforcements, fences, gates, security doors, windows, door trims and other ornate architectural and balustrade applications. Manufactured in Australia from grade 300PLUS steel, Southern Steel QLD square mild steel bars meet the relevant Australian and New Zealand standards of AS/NZS 3679.1:2016.
- Manufactured in accordance with the requirements of Australian Standard AS/NZS 3679.1 2016 in grade 300
- Grade 350 & 350L0 available on request
- Non-standard lengths or cut to size on request
- Supplied in 6m lengths
- Corner radius on squares is approximately 1.0mm
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | WIDTH (W) MM | METRES PER TONNE | APPROX LENS PER BUNDLE |
10x10 | 0.805 | 0.004 | 10 | 1242.2 | 415 = 2.004t |
12x12 | 1.159 | 0.048 | 12 | 862.8 | 291 = 2.023t |
16x16 | 2.060 | 0.064 | 16 | 485.4 | 163 = 2.015t |
20x20 | 3.219 | 0.080 | 20 | 310.7 | 104 = 2.008t |
25x25 | 5.029 | 0.100 | 25 | 198.8 | 66 = 1.991t |
40x40 | 12.874 | 0.160 | 40 | 77.7 | 26 = 1.965t |
Billets
Steel billets are hot-rolled square bars produced by hot-rolling continuous casting billets. They are often rectangular, circular or square shaped and can be formed into various shapes and sizes. Steel billets are used in expulsion, fashioning, rolling and other metal-processing operations. Southern Steel QLD billets are manufactured under Australian Standard AS 1442/1022-1045 requirements.
- Manufactured in accordance with the requirements of Australian Standard AS 1442/1022-1045
- Larger square sections may need to be cut from a thick plate
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | SIZE (B) | METRES PER TONNE | CORNER RADIUS (R) |
45x45 | 16.294 | 0.18 | 45 | 61.4 | 5.5 |
50x50 | 20.115 | 0.2 | 50 | 49.7 | 6.5 |
63x63 | 31.936 | 0.26 | 63 | 31.3 | 8.0 |
75x75 | 45.260 | 0.3 | 75 | 22.1 | 9.5 |
Round Mild Steel
Round mild steel bars are characterised by their circular cross-section. Round mild steel has a lower carbon quality than other types of steel, making it easier to cut, form, drill and machine. Round mild steel bars are used in reinforcement and can be utilised in various industrial, commercial and residential applications. Manufactured in Australia from 300PLUS steel, Southern Steel QLD round mild steel bars meet the relevant Australian and New Zealand AS/NZS 3679.1 – 300 standards.
- Manufactured in accordance with the requirements of Australian Standard AS/NZS 3679.1 2016 in grade 300
- Grade 350 & 350L0 available on request
- Typically supplied in 6m lengths
- Longer lengths available on request
DIAMETER (Ø) | WEIGHT KG/M | SURFACE AREA M2/M | METRES PER TONNE | APPROX LENGTH PER BUNDLE |
6 | 0.233 | 0.020 | 4291.8 | 664 = 1.000t |
8 | 0.394 | 0.025 | 2538.1 | 530 = 2.009t |
10 | 0.632 | 0.031 | 1582.3 | 530 = 2.009t |
12 | 0.910 | 0.039 | 1098.9 | 367 = 2.004t |
14 | 1.239 | 0.044 | 807.1 | 271 = 2.014t |
16 | 1.618 | 0.050 | 618.0 | 206 = 1.999t |
18 | 2.047 | 0.057 | 488.5 | 168 = 2.064t |
20 | 2.528 | 0.063 | 395.6 | 132 = 2.002t |
22 | 3.059 | 0.069 | 326.9 | 110 = 2.019t |
24 | 3.640 | 0.075 | 274.7 | 93 = 2.031t |
27 | 4.607 | 0.085 | 217.1 | 73 = 2.018t |
30 | 5.687 | 0.094 | 175.8 | 60 = 2.047t |
33 | 6.882 | 0.104 | 145.3 | 50 = 2.064t |
36 | 8.190 | 0.113 | 122.1 | 42 = 2.064t |
39 | 9.611 | 0.123 | 104.0 | 36 = 2.076t |
42 | 11.147 | 0.132 | 89.7 | 30 = 2.006t |
45 | 12.796 | 0.141 | 78.1 | 26 = 1.996t |
48 | 14.559 | 0.151 | 68.7 | 23 = 2.009t |
50 | 15.798 | 0.157 | 63.3 | 22 = 2.085t |
56 | 19.817 | 0.176 | 50.5 | 17 = 2.021t |
60 | 22.749 | 0.188 | 44.0 | 15 = 2.047t |
65 | 26.698 | 0.204 | 37.5 | 14 = 2.243t |
75 | 35.545 | 0.26 | 28.1 | 10 = 2.133t |
Equal Angles
Steel angles are roll-formed steel, formed by bending a single angle in a piece of steel, creating an ‘L’ shaped product. Equal angles have two axes of the same length (equal) that make a 90-degree angle. They are a multi-purpose steel component often used for reinforcement, framing, trims and brackets. They can be cut to any size and made in various strengths and thicknesses. The larger the steel angle, the more weight and stress-bearing properties. Equal angles are manufactured in accordance with AS/NZS 3679.1.
- Manufactured in accordance with the requirements of Australian Standard AS/NZS 3679.1 2016 in grade 300
- Grade 350 & 350L0 available on request
- Non-standard lengths or cut to size on request
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | SIDE A (B1) | SIDE B (B1) | THICKNESS OF FLANGE (TF) |
100x100x12 | 17.700 | 0.392 | 100 | 100 | 12.0 |
100x100x10 | 14.200 | 0.392 | 100 | 100 | 9.5 |
100x100x8 | 11.800 | 0.392 | 100 | 100 | 7.8 |
100x100x6 | 9.160 | 0.392 | 100 | 100 | 6.0 |
90x90x10 | 12.700 | 0.352 | 90 | 90 | 9.5 |
90x90x8 | 10.600 | 0.352 | 90 | 90 | 7.8 |
90x90x6 | 8.220 | 0.352 | 90 | 90 | 6.0 |
75x75x10 | 10.500 | 0.292 | 75 | 75 | 9.5 |
75x75x8 | 8.730 | 0.292 | 75 | 75 | 7.8 |
75x75x6 | 6.810 | 0.292 | 75 | 75 | 6.0 |
75x75x5 | 5.270 | 0.292 | 75 | 75 | 4.6 |
65x65x10 | 9.020 | 0.255 | 65 | 65 | 9.5 |
65x65x8 | 7.510 | 0.255 | 65 | 65 | 7.8 |
65x65x6 | 5.870 | 0.255 | 65 | 65 | 6.0 |
65x65x5 | 4.560 | 0.255 | 65 | 65 | 4.6 |
55x55x5 | 3.840 | 0.215 | 55 | 55 | 4.6 |
50x50x8 | 5.680 | 0.195 | 50 | 50 | 7.8 |
50x50x6 | 4.460 | 0.195 | 50 | 50 | 6.0 |
50x50x5 | 3.480 | 0.195 | 50 | 50 | 4.6 |
50x50x3 | 2.310 | 0.195 | 50 | 50 | 3.0 |
45x45x6 | 3.970 | 0.175 | 45 | 45 | 6.0 |
45x45x5 | 3.100 | 0.175 | 45 | 45 | 4.6 |
45x45x3 | 2.060 | 0.175 | 75 | 22.1 | 3.0 |
40x40x6 | 3.500 | 0.155 | 40 | 40 | 6.0 |
40x40x5 | 2.730 | 0.155 | 40 | 40 | 4.6 |
40x40x3 | 1.830 | 0.155 | 40 | 40 | 3.0 |
30x30x6 | 2.560 | 0.115 | 30 | 30 | 6.0 |
30x30x5 | 2.010 | 0.115 | 30 | 30 | 4.6 |
30x30x3 | 1.350 | 0.115 | 30 | 30 | 3.0 |
25x25x6 | 2.080 | 0.095 | 25 | 25 | 6.0 |
25x25x5 | 1.650 | 0.095 | 25 | 25 | 4.6 |
25x25x3 | 1.120 | 0.095 | 25 | 25 | 3.0 |
Unequal Angles
Unequal angles have two axes of different lengths (unequal) that create a 90-degree angle. The cross section has the same shape as an upper case ‘L’. Unequal angles are used in bridge building, reinforcements, framing and brackets and are made in various thicknesses and strengths. Southern Steel QLD will cut to any size. Unequal angles conform with AS/NZS 3679.1.
- Manufactured in accordance with the requirements of Australian Standard AS/NZS 3679.1 2016 in grade 300
- Grade 350 & 350L0 available on request
- Non-standard lengths or cut to size on request
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | SIDE A (B1) | SIDE B (B1) | THICKNESS OF FLANGE (TF) |
100x75x10 | 12.40 | 0.342 | 100 | 75 | 9.5 |
100x75x6 | 10.30 | 0.342 | 100 | 75 | 7.8 |
100x75x5 | 7.98 | 0.342 | 100 | 75 | 6.0 |
75x50x8 | 7.23 | 0.242 | 75 | 50 | 7.8 |
75x50x6 | 5.66 | 0.242 | 75 | 50 | 6.0 |
75x50x5 | 4.40 | 0.242 | 75 | 50 | 4.6 |
65x50x8 | 6.59 | 0.225 | 65 | 50 | 7.8 |
65x50x6 | 5.16 | 0.225 | 65 | 50 | 6.0 |
65x50x5 | 4.02 | 0.225 | 65 | 50 | 4.6 |
Parallel Flange Channels
Parallel flange channels (PFCs) are hot-rolled carbon steel channels, sometimes called ‘C sections’ or ‘C channel beams.’ Constructed using a vertical web and top and bottom horizontal flanges with inside radius corners, the shape provides superior structural support, making parallel flange channels an ideal product for frames and braces used for machinery, enclosures, vehicles, truss support beams, floor beams and portal frames. PFCs are available in a wide range of sizes and thicknesses.
- Manufactured in accordance with the requirements of Australian Standard AS/NZS 3679.1 2016 in grade 300
- Grade 350 & 350L0 available on request
- Non-standard lengths or cut to size on request
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | DEPTH OF SECTION (D) MM | WIDTH OF FLANGE (BF) MM | THICKNESS OF FLANGE (TF) | WEB THICKNESS (TW) MM | DEPTH BETWEEN FLANGES (D1) |
125PFC | 11.900 | 0.494 | 125 | 65 | 7.5 | 4.7 | 110 |
100PFC | 8.330 | 0.385 | 100 | 50 | 6.7 | 4.2 | 87 |
75PFC | 5.920 | 0.296 | 75 | 40 | 6.1 | 3.8 | 63 |
Tapered Flange Beams
Tapered flange beams are similar to the “I” shape of universal beams, however they have tapered flanges – the two horizontal sections (flanges) taper, normally to a 98-degree angle from the web. The flanges provide resistance to bending and are used regularly for support in residential and commercial construction projects and industrial applications where maximal strength is paramount. Southern Steel QLD stocks a range of tapered flange beams in a variety of sizes and lengths, which are manufactured in Australia from 300PLUS steel and exceed the minimum requirements of AS/NZS 3679.1.
- Manufactured in accordance with the requirements of Australian Standard AS/NZS 3679.1 2016 in grade 300
- Grade 350 & 350L0 available on request
- Non-standard lengths or cut to size on request
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | DEPTH OF SECTION (D) MM | WIDTH OF FLANGE (BF) MM | THICKNESS OF FLANGE (TF) | WEB THICKNESS (TW) MM | DEPTH BETWEEN FLANGES (D1) |
125 TFB | 13.1 | 0.470 | 125 | 65 | 8.5 | 5.0 | 108 |
100 TFB | 7.2 | 0.349 | 100 | 45 | 6.0 | 4.0 | 88 |
DuraGal® Angles
DuraGal® angles are roll-formed from high-strength grade steel and protected with a corrosion-resistant zinc coating. This improves the bars’ resistance to rust, helps prevent cracking at the edges and works as a base for powder coating or paint. Known for their superior strength, DuraGal® angles come in various standard lengths and are commonly used in framing and structural applications that require a rust-resistant product.
- Radius (‘r’) is a minimum 3.5mm.
- A minimum of 100g/m2 coating of zinc is applied by inline galvanising to a mechanically (shot blasted) and chemically cleaned bright metal (AS 1627.4 Class 3.0) surface. A clear polymer barrier coating protects the galvanising prior to fabrication.
- DuraGal® is readily welded. Its thin, evenly applied inline galvanised coating ensures minimal welding fumes. No need to preheat, change consumables or welding settings.
- Some items may require a three-pack minimum order quantity.
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | DEPTH (D) | WIDTH (B) MM | THICKNESS (T) | LENGTH M | TOTAL QTY/PK |
25x25x2.5 | 0.894 | 0.095 | 25 | 25 | 2.5 | 6 | 80 |
30x30x2.5 | 1.093 | 0.117 | 30 | 30 | 2.5 | 6 | 80 |
40x40x2.5 | 1.490 | 0.157 | 40 | 40 | 2.5 | 6 | 60 |
40x40x4.0 | 2.310 | 0.155 | 40 | 40 | 4.0 | 7.8 | 39 |
45x45x2.5 | 1.689 | 0.175 | 45 | 45 | 2.5 | 6 | 54 |
50x50x2.5 | 1.888 | 0.197 | 50 | 50 | 2.5 | 6 | 27 |
50x50x2.5 | 1.888 | 0.197 | 50 | 50 | 2.5 | 9 | 33 |
50x50.4.0 | 2.943 | 0.195 | 50 | 50 | 4.0 | 6 | 27 |
50x50.4.0 | 2.943 | 0.195 | 50 | 50 | 4.0 | 9 | 27 |
50x50x5.0 | 3.594 | 0.195 | 50 | 50 | 5.0 | 6 | 24 |
50x50x5.0 | 3.594 | 0.195 | 50 | 50 | 5.0 | 9 | 24 |
50x50x5.0 | 3.594 | 0.195 | 50 | 50 | 5.0 | 12 | 24 |
50x50x6.0 | 4.210 | 0.195 | 50 | 50 | 6.0 | 9 | 21 |
65x65x4.0 | 3.892 | 0.255 | 65 | 65 | 4.0 | 9 | 22 |
65x65x5.0 | 4.779 | 0.255 | 65 | 65 | 5.0 | 9 | 22 |
75x75x4.0 | 4.525 | 0.295 | 75 | 75 | 4.0 | 9 | 22 |
75x75x5.0 | 5.569 | 0.293 | 75 | 75 | 4.0 | 9 | 22 |
75x75x6.0 | 6.664 | 0.292 | 75 | 75 | 6.0 | 9 | 18 |
100x100x6.0 | 9.078 | 0.392 | 100 | 100 | 6.0 | 12 | 16 |
125x75x6.0 | 9.078 | 0.392 | 125 | 75 | 6.0 | 12 | 16 |
150x100x6.0 | 11.492 | 0.500 | 150 | 100 | 6.0 | 12 | 16 |
DuraGal® Flats
DuraGal® flats are made from galvanised steel and provide superior strength and protection against corrosion. DuraGal® flat bars have a zinc coating, which helps to prevent the bar from rusting and cracking and is a base for powder coating or paint. DuraGal® flats come in various standard lengths and are commonly used in residential construction, non-residential construction and general applications.
- A minimum of 100g/m2 coating of zinc is applied by inline galvanising to a mechanically (shot blasted) and chemically cleaned bright metal (AS 1627.4 Class 3.0) surface. A clear polymer barrier coating protects the galvanising prior to fabrication.
- DuraGal® is readily welded. Its thin, evenly applied inline galvanised coating ensures minimal welding fumes. No need to preheat, change consumables or welding settings.
- Some items may require a three-pack minimum order quantity.
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | DEPTH (D) MM | THICKNESS (T) MM | LENGTH M | TOTAL QTY/PK |
50x4.0 | 1.582 | 0.108 | 50 | 4.0 | 6 | 75 |
50x5.0 | 1.975 | 0.110 | 50 | 5.0 | 6 | 45 |
65x5.0 | 2.567 | 0.140 | 65 | 5.0 | 6 | 36 |
75x4.0 | 2.373 | 0.158 | 75 | 4.0 | 6 | 38 |
75x5.0 | 2.962 | 0.160 | 75 | 4.0 | 6 | 32 |
100x4.0 | 3.165 | 0.208 | 100 | 4.0 | 6 | 28 |
100x5.0 | 3.950 | 0.210 | 100 | 5.0 | 6 | 28 |
100x6.0 | 4.829 | 0.212 | 100 | 6.0 | 6 | 26 |
130x5.0 | 5.134 | 0.270 | 130 | 5.0 | 6 | 28 |
150x5.0 | 5.924 | 0.310 | 150 | 5.0 | 6 | 28 |
150x6.0 | 7.243 | 0.312 | 150 | 6.0 | 6 | 24 |
200x6.0 | 9.657 | 0.512 | 250 | 6.0 | 6 | 28 |
250x5.0 | 9.874 | 0.510 | 250 | 5.0 | 6 | 23 |
DuraGal® Channels
DuraGal® channels are roll-formed from high-strength grade steel. The surface is covered by a zinc layer that offers a long-term protective coating, corrosion resistance, improved tensile strength and durability. DuraGal® channels provide superior structural support, making them ideal for frames and braces for machinery and vehicle enclosures, building and structural support applications. DuraGal® channels are available in an extensive range of thicknesses and sizes.
- Radius (‘r’) is a minimum 3.5mm.
- A minimum of 100g/m2 coating of zinc is applied by inline galvanising to a mechanically (shot blasted) and chemically cleaned bright metal (AS 1627.4 Class 3.0) surface. A clear polymer barrier coating protects the galvanising prior to fabrication.
- DuraGal® is readily welded. Its thin, evenly applied inline galvanised coating ensures minimal welding fumes. No need to preheat, change consumables or welding settings.
- Some items may require a three-pack minimum order quantity.
DESIGNATION | WEIGHT KG/M | SURFACE AREA M2/M | DEPTH (D) MM | WIDTH (B) MM | THICKNESS (T) | LENGTH M | TOTAL QTY/PK |
75x40x4.0 | 4.430 | 0.299 | 75 | 40 | 4.0 | 9 | 18 |
100x50x4.0 | 5.584 | 0.382 | 100 | 50 | 4.0 | 9 | 18 |
125x65x4.0 | 7.595 | 0.481 | 125 | 65 | 4.0 | 9 | 18 |
150x75x5.0 | 11.177 | 0.580 | 150 | 75 | 5.0 | 12 | 12 |
180X75X5.0 | 12.362 | 0.640 | 180 | 75 | 5.0 | 12 | 12 |
200x75x5.0 | 13.152 | 0.669 | 200 | 75 | 5.0 | 12 | 12 |
200x75x6.0 | 15.742 | 0.688 | 200 | 75 | 6.0 | 12 | 12 |
230x75x6.0 | 17.198 | 0.729 | 230 | 75 | 6.0 | 12 | 12 |
250x90x6.0 | 19.605 | 0.758 | 25 | 90 | 6.0 | 12 | 8 |
300X90X6.0 | 22.019 | 0.847 | 300 | 90 | 6.0 | 12 | 6 |
